MAGNECOR IGNITION CABLES FOR INDUSTRIAL AND OTHER USES
Magnecor ignition cables were originally designed for automotive applications. However, over many years, we have been been supplying ever-increasing amounts of our ignition cables and parts to other industries.
Magnecor has not promoted its ignition cables to other industries, therefore we can only assume our ignition cables have been discovered by engineers searching for EMI suppressed high-grade heat resistant ignition cable that is not available elsewhere.
For many years, our sales have indicated that Magnecor ignition cables are used for at least the following non-automotive purposes:
* Ignition equipment for ovens, boilers, heaters, furnaces etc.;
* Oil and gas field remote flair ignition devices, equipment and gas engines used by oil and gas field and energy suppliers;
* Gasoline, LPG and natural gas (CNG) powered industrial engines used in lift trucks, power generators, stationary engines and other equipment etc., particularly if prone to overheating;
* Controlled explosive demolition;
* Thermal, high velocity oxy-fuel coating spraying;
* Various other industrial, aero, marine and military applications, particularly applications that require EMI suppression and high heat tolerance.
NO MINIMUM ORDERS
Cables can be supplied in bulk, cut to any length or supplied as ready-to-fit ignition leads with terminations and insulating boots attached to suit your application. Complete ignition lead (wire) sets can also be supplied. Heavy duty stainless steel and brass terminals and insulating boots and a heavy duty professional crimping tool can be ordered separately.
There is NO minimum order for anything
Please email a description of your requirements to:
SEE BELOW FOR METAL TERMINALS, INSULATING BOOTS AND CRIMPING TOOL
There is a lot to see, so we appreciate your patience when downloading.
IMPORTANT: Magnecor has a considerable number of metal terminals and insulating boots in it's product line. Please take into account that particular terminals need to be matched to particular insulating boots. Unless you are knowledgeable about which terminals fit which boots, please ask for assistance and advice when ordering. Magnecor can also crimp special application terminals and fit special insulating boots to any cable as specified by the customer.
Heavy duty crimping tool designed specifically to crimp metal terminals to ignition cable. The tool steel jaws are stepped from 6mm to 15mm wide to accommodate the full crimp section of the various heavy duty stainless steel and brass terminals supplied by Magnecor or terminals used by customers for special applications. Can be used to crimp terminals onto ignition cable from 7mm to 10mm in diameter. The frame of the tool is made from quality materials with longevity in mind. Actual size of tool is 290mm in overall length.
This is not an inexpensive tool, but it's a worthwhile investment if you are always crimping terminals to ignition cables. This professional crimping tool is superior in every respect to the narrow-jawed mild steel crimping pliers and the two piece aluminum closing tools (which are usually rendered useless after two crimp operations) currently available in the USA market.